Custom DTF - Print Ready Gang Sheet

Gang sheets must be pre-built to correct selected size with images pre-sized on sheet. Canva is our recommended program to use for setting up your Gang Sheets prior to uploading. When saving your image in Canva, Make sure to select PNG, slide the bar all the way to the right, and click transparent background.

-YOUR ARTWORK MUST BE PRINT READY

-WE WILL PRINT YOUR SHEET AS IS

- DO NOT MIRROR YOUR IMAGES. IF YOU DO THEY WILL BE PRINTED BACKWARDS.

-YOU WILL RECEIVE THIS ITEM AS A ROLL, NOT INDIVIDUALLY CUT. YOU WILL HAVE TO CUT YOUR IMAGES APART ONCE THEY ARE DELIVERED TO YOU 

-YOU ARE RESPONSIBLE FOR SIZING YOUR IMAGES. WE WILL NOT ALTER THE SIZING YOU SUBMIT

-IF YOU ARE UNSURE HOW TO DO THIS, PLEASE USE OUR GANG SHEET BUILDER (SEE LISTING FOR GANG SHEET BUILDER). 

-NO REFUNDS ON THIS PRODUCT

All custom DTF (Direct To Film) prints are printed using CMYK (Cyan, Magenta, Yellow, and Key) colors. This means four ink plates are used in your design and is matched as closely as possible to the CMYK color model. We saturate designs as much as possible to match the file that is sent.  We do our absolute best to get colors as close as possible, but a file on a computer is going to look different than a direct to film transfer using water-based ink. We have a color chart (Using CANVA color chart hex codes) available free of charge, that can be added to your cart for designing reference when needing to match colors exactly to how they will be printed. 

PRESSING INSTRUCTIONS- We recommend heating your press to 310-325°F  depending on your press. We recommend starting with a lower temp and going to a higher temp if needed. Press the shirt or material before adding the transfer to remove moisture for 10 seconds. Lay the transfer down flat with the design facing the material. Press the transfer using HEAVY PRESURE for 20 seconds. Let cool, COLD PEEL. Cover the design with a Teflon or Parchment Paper sheet. Press for 10 more seconds.